Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. :
  3. Trk 502
    4. : How do you replace the rear brake pads on the Benelli TRK 502X?

Model: Benelli Trk 502
Part: Brake pads
How do you replace the rear brake pads on the Benelli TRK 502X?

The procedure for replacing the rear brake pads of the Benelli TRK 502X is done by loosening the screws that secure the brake caliper to its corresponding disc. Once the caliper fastening screws have been removed, it will be possible to detach it from its disc by removing the pads inside. After the old pads have been removed, it will be possible to insert the new ones into the caliper, repositioning it on the corresponding disc. Once the installation is complete, it will be possible to verify that the brake is functioning correctly.


Posted on 22 November 2023 by ScegliAuto



Benelli TRK 502 rear brake pads replacement
Trk 502 Today we will see how to remove and replace the rear brake pads on a Benelli TRK 502 motorcycle, following these steps. First we go to unscrew the fi
How do you replace the chain on the Benelli TRK 502X?
Trk 502 Replacing the chain of the Benelli TRK 502X is done by removing the plastic panel that covers the sprocket on the left side of the bike. Once this pa
How to replace the rear brake pads of the Benelli TRK 502.
Trk 502 Today we are going to see the necessary instructions that will allow us to disassemble and replace the rear brake pads of the Benelli TRK 502 motorcy

How to replace the starter motor on the Ktm XC 250

In this video tutorial we will see the instructions on how to disassemble and replace the starter motor of the Ktm XC 250 two-stroke enduro motorcycle. First of all we go to remove the plastic cover that we find on the left of the engine, unscrewing all the screws, in order to access the starter motor; then we are going to unscrew the additional screws of the starter motor, disconnecting the electrical connector to remove it and replace it with the new one, as shown in the video. At this point we are going to install the new starter motor, applying the reverse procedure of the disassembly!

Watch the video!


by ScegliAuto

More videos