Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil of the Benelli TRK 502X?

Model: Benelli Trk 502
Part: Engine oil

Video tutorial

The oil change on the Benelli TRK 502X is done by loosening the drain plug of the tank containing the oil, which will be located in the lower central part of the motorcycle: after this plug has been loosened, it will be possible to collect the oil inside a properly positioned container.

Once all the oil has drained out, it will be possible to top up by inserting the new oil through the corresponding vent located on the right side of the vehicle, in the upper part of the crankcase: once the top up is completed, it will be possible to close the crankcase by inserting the appropriate plug.


Posted on 30 January 2025 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Benelli TRK 502X?
How to Replace the Exhaust on a Benelli TRK 502X?
Trk 502 To replace the exhaust on the Benelli TRK 502X, loosen the screws securing the exhaust end can to its housing, located on the right side of the motor…
How do you replace the front brake pads of the Benelli TRK 502X?
How do you replace the front brake pads of the Benelli TRK 502X?
Trk 502 To replace the front brake pads of the Benelli TRK 502X, you need to loosen the screws that secure the brake caliper to the corresponding disc: once …
How to Replace the Chain on a Benelli TRK 502X?
How to Replace the Chain on a Benelli TRK 502X?
Trk 502 To replace the chain on a Benelli TRK 502X, start by removing the plastic panel covering the sprocket on the left side of the bike. Once this panel i…

How to Replace the Gear Oil of the Piaggio Vespa PX 125

To replace the gear oil of the Piaggio Vespa PX 125, loosen the drain plug of the oil reservoir located at the bottom of the transmission casing on the right side of the scooter. Once the plug is loosened, collect all the used oil in a suitably positioned container until it has completely drained. Now, top up the oil through the breather located on the transmission casing using a pump. After adding the new oil, you can start the engine to check that everything is functioning properly.

Watch the video!


by ScegliAuto

More videos