Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Benelli TRK 502 X?

Model: Benelli Trk 502
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Benelli TRK 502 X, an extremely simple and quick operation. First of all, we wait for the engine to be cold enough, then we position a container underneath it and remove the lower protective cover.

We then locate the drain hole bolt, unscrew it using a socket wrench and let all the oil contained in the system drain out. At this point, all that remains is to unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the appropriate hole.


Posted on 7 May 2025 by ScegliAuto


Related tutorials

How to Perform an Oil Change on a Benelli TRK 502
How to Perform an Oil Change on a Benelli TRK 502
Trk 502 Let’s go through the procedure for performing routine maintenance by changing the engine oil and oil filter on a Benelli TRK 502. First, place the mo…
How to Change Engine Oil and Oil Filter on Benelli TRK 502
How to Change Engine Oil and Oil Filter on Benelli TRK 502
Trk 502 In this guide, learn how to change the engine oil and oil filter as part of regular maintenance on a Benelli TRK 502. First, position the motorcycle …
How to Perform Maintenance (Oil Change) on the Benelli TRK 502
How to Perform Maintenance (Oil Change) on the Benelli TRK 502
Trk 502 Today, in this video tutorial, you will learn how to carry out routine maintenance by replacing the engine oil and oil filter of the Benelli TRK 502 …

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos