Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install additional spotlights on the Benelli TRK 502

Model: Benelli Trk 502
Part: Light bulb

Video tutorial

This guide provides the main instructions on how to install additional spotlights or fog lights on the Benelli TRK 502 motorcycle. First, gather the necessary kit for installing your compatible additional lights; install and securely fix the lights at the correct height, as shown in the video.

At this point, carry out the wiring of the fog lights, connecting to the fuse box; then install the switch for activating the lights on the handlebars, checking their correct operation by following the video tutorial to the end!


Posted on 11 September 2026 by ScegliAuto


Related tutorials

How to Install Additional or Fog Lights on the Benelli TRK 502
How to Install Additional or Fog Lights on the Benelli TRK 502
Trk 502 Today, we will go through the instructions for installing additional or fog lights on the Benelli TRK 502 motorcycle. First, place the motorcycle on …
How to Replace the Radiator and Coolant Hoses on the Benelli TRK 502
How to Replace the Radiator and Coolant Hoses on the Benelli TRK 502
Trk 502 This guide provides instructions for replacing the radiator and engine coolant hoses on the Benelli TRK 502 motorcycle. First, place the motorcycle o…
Fitting Front Fog Lights on the Benelli TRK 502
Fitting Front Fog Lights on the Benelli TRK 502
Trk 502 In this video, follow the main instructions to install the front fog lights on the Benelli TRK 502 motorcycle, as well as on the 251. First, locate t…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos