Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Front Fog Lights on the Benelli TRK 502

Model: Benelli Trk 502
Part: Headlight

Video tutorial

In this video, follow the main instructions to install the front fog lights on the Benelli TRK 502 motorcycle, as well as on the 251. First, locate the area where you can install the lights, which is on the side impact bar. Obtain the correct type of fog lights and make the necessary electrical connections to the switch and the battery.

Additionally, securely fix the lights using the provided bolts; these lights can be found complete with installation instructions at auto parts stores.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Install Additional or Fog Lights on the Benelli TRK 502
How to Install Additional or Fog Lights on the Benelli TRK 502
Trk 502 Today, we will go through the instructions for installing additional or fog lights on the Benelli TRK 502 motorcycle. First, place the motorcycle on …
How to install additional spotlights on the Benelli TRK 502
How to install additional spotlights on the Benelli TRK 502
Trk 502 This guide provides the main instructions on how to install additional spotlights or fog lights on the Benelli TRK 502 motorcycle. First, gather the …
How to Reset the Engine Light on a Benelli TRK 502
How to Reset the Engine Light on a Benelli TRK 502
Trk 502 Before you can begin, sit on the seat of your Benelli TRK 502. Start by setting the engine start switch to the active position. Then, fully rotate an…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos