|
Do it yourself
| |||
| ||||
|
Model: Benelli Trk 502
To completely free the exhaust fitted on the Benelli TRK 502, unscrew the bolts securing the exhaust end can to its housing: this component can then be removed from its position by loosening the connecting clamp located between the exhaust and the manifold. This will allow you to fully detach the end can in order to fit the new one: the new exhaust can now be securely fastened to the manifold. Ensure everything operates correctly after the replacement.
Posted on 23 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Trk 502
In today's tutorial video, follow the main instructions to remove the silencer or the entire exhaust system from the Benelli Trk 502. First, place yo…
Trk 502
The replacement of the exhaust pipe of the Benelli TRK 502 can be carried out by loosening the screws that fix the exhaust terminal to its housing: t…
Trk 502
The exhaust installed on the Benelli TRK 502X can be replaced by loosening the screws that secure the component to its housing, which is located on t…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.054
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |