Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today’s video, we will see how to remove and replace the front headlight bulb on a Benelli TRK 502. First, remove the plastic protective cap of the bulbs: then access the rear of the headlight, where you can disconnect the electrical connector of the bulb and remove the metal clip. At this point, remove the bulb and replace it with a new one of the correct type (in this case, H7 fitting). Finally, install the new bulb by inserting it into the housing and connecting the electrical connector along with the clip, as shown in the video!

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb on a Benelli TRK 502
Replacing the Front Headlamp Bulb on a Benelli TRK 502
Trk 502 In this brief and simple guide, learn how to remove and replace the front headlamp bulb on the Benelli TRK 502 motorcycle by following the instructio…
How to Reset the Engine Light on a Benelli TRK 502
How to Reset the Engine Light on a Benelli TRK 502
Trk 502 Before you can begin, sit on the seat of your Benelli TRK 502. Start by setting the engine start switch to the active position. Then, fully rotate an…
Replacing the Front Headlight Bulb on Benelli TRK 502
Replacing the Front Headlight Bulb on Benelli TRK 502
Trk 502 Replacing one of the front headlight bulbs on the Benelli TRK 502 is very simple, and here’s how to do it. With the motorcycle turned off, turn the h…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos