Do it yourself
Frequently asked questions about cars and motorcycles
This video tutorial explains how to replace the headlight on a Harley Davidson 883. First, remove the headlight by unscrewing the two screws and rotating the ring to extract it. Before fully removing the headlight, disconnect the connector as shown in the video. Now, following the video instructions, take the new headlight and begin the installation. Place the gasket around the new headlight, connect the plug, and then the power wires. Next, insert the headlight into its housing, rotate the ring, and screw in the Torx screws, and you're done.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

883 In this tutorial, see how to replace the front headlamp on a Harley-Davidson 883, a very simple and quick operation. First, ensure the key is not ins…
883 To replace the seat on the Harley Davidson 883, remove the bolt located at the rear of the seat. This removal will allow you to lift the seat to clea…
883 The transponder of Harley Davidson motorcycles is an electronic component related to the alarm system. In the video, we see one belonging to a Harley…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos