Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Seat on a Harley Davidson 883

Model: Harley Davidson 883
Part:

This video is currently unavailable

To replace the seat on the Harley Davidson 883, remove the bolt located at the rear of the seat. This removal will allow you to lift the seat to clean the area underneath.

Then, the new seat can be positioned where the old seat was. To secure the new seat, insert a cross pin at the front and reattach the rear bolt that was removed earlier. It will also be possible to fit an additional seat section to facilitate carrying a passenger.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

883 To replace the battery of the Harley Davidson 883, remove the cover located on the left side of the bike, just under the seat. Then, remove the fuse …
883 To replace the clutch on a Harley Davidson 883, loosen the screws that secure the cover on the left side of the vehicle. Once the securing screws are…
883 In order to replace the exhaust pipe of the Harley Davidson 883, you need to loosen the screws that fix the exhaust manifolds to the engine cylinder …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to change the engine oil in the Honda CBR 600RR?

Changing the engine oil in the Honda CBR 600RR, as shown in this tutorial, is an extremely simple and quick operation. First, wait for the engine to be completely cold, then undo the indicated screws and remove the lower fairing. Next, position a container underneath the bike, remove the drain bolt with a 12mm socket, and allow all the oil in the system to drain out. Once this is done, you can remove the old filter, fit the replacement, tighten the bolt, and add the necessary amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos