Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Triumph Tiger 1200 Rally Explorer

Model: Triumph Tiger 1200 Rally Explorer
Part: Service warning light

Video tutorial

In this guide, you will discover the instructions necessary to reset the service light for routine maintenance on the Triumph Tiger 1200 Rally Explorer. To perform the service reset, you will need a specific diagnostic tool connected to the OBD port located under the rider's seat; using specific software, you will reset the maintenance light by following the guided procedure as shown in the video.

At this point, check that the service light has been reset on the instrument cluster before disconnecting the tool.


Posted on 31 October 2026 by ScegliAuto


Related tutorials

How to replace the transmission oil in the Triumph Tiger 1200 Rally Explorer?
How to replace the transmission oil in the Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer In this tutorial we can see how to replace the transmission oil in the Triumph Tiger 1200 Rally Explorer, a very simple and fast operation. First of …
How do you replace the engine oil of the Triumph Tiger 1200 Rally Explorer?
How do you replace the engine oil of the Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer To replace the engine oil of the Triumph Tiger 1200 Rally Explorer, you will need to unscrew the drain plug of the oil pan located in the central low…
How to replace the engine oil in the Triumph Tiger 1200 Rally Explorer?
How to replace the engine oil in the Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer In this tutorial we can see how to replace the engine oil in the Triumph Tiger 1200 Rally Explorer, an extremely simple and quick operation. First of…

How to Replace the Front Wheel Bearing on a GasGas EC 300

To replace the front wheel bearing on a GasGas EC 300, loosen the nuts that secure the front wheel to the corresponding axle of the lower fork: this will allow you to completely remove the wheel from its position. Once removed, you need to undo the bolts that secure the disc, removing it to access the underlying bearing: this can then be extracted from its housing, allowing it to be replaced with a new spare part. After replacement, you can reassemble all the components.

Watch the video!


by ScegliAuto

More videos