Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this brief and simple guide, you will find instructions to remove and replace the front headlight of the Piaggio Vespa GTS 300 scooter, as well as the Super and HPE models. First, place the scooter on its central stand and start by removing the manufacturer's badge found on the front panel. Then, unscrew the fixing screws located under the headlight and on the side, also removing the mirrors to take off the headlight cover, as shown in the video. At this point, disconnect the electrical connector of the bulb to remove the headlight from the cover, replacing it with the new one!

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter of the Piaggio Vespa GTS 300 HPE
How to Change the Engine Oil and Oil Filter of the Piaggio Vespa GTS 300 HPE
Vespa Gts 300 .. oil and oil filter of the Piaggio Vespa GTS 300 HPE. First, place your scooter on the centre stand and start unscrewing the oil drain bolt located under.. …
How to Change the Coolant in the Piaggio Vespa GTS 300 HPE
How to Change the Coolant in the Piaggio Vespa GTS 300 HPE
Vespa Gts 300 .. top up the coolant in the Piaggio Vespa GTS 300 HPE, following the instructions below. First, place your scooter on the centre stand and begin by removing.. …
Disassembly of the rear wheel of the Piaggio Vespa GTS 300 Super
Disassembly of the rear wheel of the Piaggio Vespa GTS 300 Super
Vespa Gts 300 Following these brief steps, we will see how to disassemble and replace the rear wheel and tire of the Piaggio Vespa GTS 300 Super. First of all, put…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos