Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will discover the steps to carry out the routine maintenance service by replacing the engine oil and oil filter of the Piaggio Vespa GTS 300 HPE. First, place your scooter on the centre stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge and replace it with a new one (tightening gently), as shown in the video. Now unscrew the dipstick and pour in the oil with the specifications indicated in the user and maintenance manual!

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Coolant in the Piaggio Vespa GTS 300 HPE
How to Change the Coolant in the Piaggio Vespa GTS 300 HPE
Vespa Gts 300 In this guide, you will learn how to bleed and top up the coolant in the Piaggio Vespa GTS 300 HPE, following the instructions below. First, place yo…
How to Change the Engine Oil on Piaggio Vespa GTS 300
How to Change the Engine Oil on Piaggio Vespa GTS 300
Vespa Gts 300 To change the engine oil on the Piaggio Vespa GTS 300, loosen the drain plug of the oil tank, located at the bottom in front of the exhaust. Once the…
How to Remove the Front Headlight on a Piaggio Vespa GTS 300 - Super - HPE
How to Remove the Front Headlight on a Piaggio Vespa GTS 300 - Super - HPE
Vespa Gts 300 In this brief and simple guide, you will find instructions to remove and replace the front headlight of the Piaggio Vespa GTS 300 scooter, as well as…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos