Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Following these brief steps, we will see how to disassemble and replace the rear wheel and tire of the Piaggio Vespa GTS 300 Super. First of all, put the center stand and start by disassembling and removing the muffler silencer, unscrewing the screws found on the sides and on the collector; in this way it will be possible to unscrew the central wheel nut with a socket wrench with extension, removing the metal pin first, as shown in the video. At this point, remove the wheel and replace the tire if necessary with a new one, finally reassembling the muffler!

Posted on 23 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on the Piaggio Vespa GTS 300 Super
How to set the time on the Piaggio Vespa GTS 300 Super
Vespa Gts 300 This short and simple guide will show us how to set the time on the display of the instrument panel of the Piaggio Vespa GTS 300 Super. First of all,…
How to Replace the Exhaust on a Piaggio Vespa GTS 300
How to Replace the Exhaust on a Piaggio Vespa GTS 300
Vespa Gts 300 To replace the exhaust on a Piaggio Vespa GTS 300, you need to loosen the screws that secure it to its housing on the right side of the scooter, near…
How to Remove the Front Headlight on a Piaggio Vespa GTS 300 - Super - HPE
How to Remove the Front Headlight on a Piaggio Vespa GTS 300 - Super - HPE
Vespa Gts 300 In this brief and simple guide, you will find instructions to remove and replace the front headlight of the Piaggio Vespa GTS 300 scooter, as well as…

How to replace the headlight bulbs on a Suzuki GSXR 600?

In this tutorial, you will see how to replace the headlight bulbs on a Suzuki GSXR 600, an extremely simple and quick operation. First, ensure that the key is not inserted, then unscrew the two indicated screws and separate the dashboard from the support. Next, disconnect the power connectors of the bulbs, remove the rubber caps, and unclip the metal clips to extract the bulbs from their respective housings. At this point, you can insert the replacements, avoiding touching the glass directly with your bare hands, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos