Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This short and simple guide will show us how to set the time on the display of the instrument panel of the Piaggio Vespa GTS 300 Super. First of all, turn on the instrument panel and start pressing the menu button located under the throttle to go to the time settings; hold down the button to enter the settings, then proceed to change the hour and then the minutes (using the selector), as shown in the video. At this point, exit the time setting to save the changes made, turning off the instrument panel and starting the engine!

Posted on 29 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on the display of the Piaggio Vespa GTS 300 dashboard
How to set the time on the display of the Piaggio Vespa GTS 300 dashboard
Vespa Gts 300 The following steps will show us how to set the time on the display of the instrument panel of the Piaggio Vespa GTS 300. First, we put the scooter o…
Disassembly of the rear wheel of the Piaggio Vespa GTS 300 Super
Disassembly of the rear wheel of the Piaggio Vespa GTS 300 Super
Vespa Gts 300 Following these brief steps, we will see how to disassemble and replace the rear wheel and tire of the Piaggio Vespa GTS 300 Super. First of all, put…
How to Remove the Front Headlight on a Piaggio Vespa GTS 300 - Super - HPE
How to Remove the Front Headlight on a Piaggio Vespa GTS 300 - Super - HPE
Vespa Gts 300 In this brief and simple guide, you will find instructions to remove and replace the front headlight of the Piaggio Vespa GTS 300 scooter, as well as…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos