Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cylinder of the Keeway RKS 150?

Model: Keeway Rks 150
Part: Engine

Video tutorial

To replace the cylinder of the Keeway RKS 150, disconnect the coil connected to the top of the cylinder; once the coil is disconnected, you can remove the spark plug underneath using a socket spanner. After the spark plug is removed, loosen the screws that secure the cylinder to the top of the engine block to completely withdraw it; once removed, position the new replacement part, securing it with the screws and reinserting the spark plug and coil.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to replace the piston on the Keeway RKS 150?
How to replace the piston on the Keeway RKS 150?
Rks 150 To replace the piston on the Keeway RKS 150, loosen the screws that secure the cylinder to the top of the unit, allowing for complete removal. After …
How do you disassemble the engine of the Keeway RKS 150?
How do you disassemble the engine of the Keeway RKS 150?
Rks 150 To disassemble the engine of the Keeway RKS 150, you need to loosen the screws that attach the engine block to the center of the frame: once the fixi…
Guide to Replacing the Carburettor on the Keeway RKS 150
Guide to Replacing the Carburettor on the Keeway RKS 150
Rks 150 This guide provides instructions for removing and replacing the carburettor on the Keeway RKS 150 motorcycle. First, place your motorcycle on the cen…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos