Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Carburettor on the Keeway RKS 150

Model: Keeway Rks 150
Part: Carburetor

Video tutorial

This guide provides instructions for removing and replacing the carburettor on the Keeway RKS 150 motorcycle. First, place your motorcycle on the centre stand and disconnect the fuel line, ensuring you close the fuel tap first.

Next, disconnect the throttle cable and undo the screw of the intake duct clamp on the engine casing, as shown in the video. At this point, clean or replace the carburettor, applying the reverse procedure for refitting your carburettor!


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to replace the cylinder of the Keeway RKS 150?
How to replace the cylinder of the Keeway RKS 150?
Rks 150 To replace the cylinder of the Keeway RKS 150, disconnect the coil connected to the top of the cylinder; once the coil is disconnected, you can remov…
How to Replace the Throttle Cable on the Keeway RKS 150?
How to Replace the Throttle Cable on the Keeway RKS 150?
Rks 150 To replace the throttle cable on the Keeway RKS 150, loosen the bolt that secures the end at the throttle valve: this end can be found on the right s…
How to replace the front brake pads of the Keeway RKS 150?
How to replace the front brake pads of the Keeway RKS 150?
Rks 150 You can replace the front brake pads of the Keeway RKS 150 by loosening the screws that secure the brake caliper to its housing: once the screws are …

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos