Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads of the Keeway RKS 150?

Model: Keeway Rks 150
Part: Brake pads

Video tutorial

You can replace the front brake pads of the Keeway RKS 150 by loosening the screws that secure the brake caliper to its housing: once the screws are loosened, proceed to remove the pin that holds the pads in place in order to extract them and insert the new ones.

Once the new pads are positioned inside the caliper, remount the caliper onto the disc.

It will be necessary to secure it with the appropriate screws, and then you can check that everything functions correctly.


Posted on 24 July 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Carburettor on the Keeway RKS 150
Guide to Replacing the Carburettor on the Keeway RKS 150
Rks 150 This guide provides instructions for removing and replacing the carburettor on the Keeway RKS 150 motorcycle. First, place your motorcycle on the cen…
How to replace the piston on the Keeway RKS 150?
How to replace the piston on the Keeway RKS 150?
Rks 150 To replace the piston on the Keeway RKS 150, loosen the screws that secure the cylinder to the top of the unit, allowing for complete removal. After …
How to Replace the Clutch on the Keeway RKS 150?
How to Replace the Clutch on the Keeway RKS 150?
Rks 150 To replace the clutch on the Keeway RKS 150, you need to loosen the screws that secure the cover located on the right side of the bike, in the centra…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos