Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Throttle Cable on the Keeway RKS 150?

Model: Keeway Rks 150
Part: Accelerator

Video tutorial

To replace the throttle cable on the Keeway RKS 150, loosen the bolt that secures the end at the throttle valve: this end can be found on the right side of the bike. Once this end of the cable is disconnected, unscrew the screws that secure the switch block to the base of the right handlebar.

After detaching it, the other end of the throttle cable can be removed by loosening the corresponding nut. At this point, connect the new cable to both ends using the appropriate nuts.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Carburettor on the Keeway RKS 150
Guide to Replacing the Carburettor on the Keeway RKS 150
Rks 150 This guide provides instructions for removing and replacing the carburettor on the Keeway RKS 150 motorcycle. First, place your motorcycle on the cen…
How to Replace the Clutch on a Keeway RKS 150
How to Replace the Clutch on a Keeway RKS 150
Rks 150 To replace the clutch on a Keeway RKS 150, you need to loosen the screws securing the cover on the right side of the bike, in the central lower area:…
How to Change the Engine Oil of a Keeway RKS 150?
How to Change the Engine Oil of a Keeway RKS 150?
Rks 150 To change the engine oil of a Keeway RKS 150, loosen the drain plug of the oil sump, which is located at the central lower part of the vehicle: once …

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos