Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Keeway RKS 150

Model: Keeway Rks 150
Part: Clutch

Video tutorial

To replace the clutch on a Keeway RKS 150, you need to loosen the screws securing the cover on the right side of the bike, in the central lower area: once the screws are loosened, you can detach the cover and access the underlying clutch. The clutch can then be removed from its housing by loosening the screws that secure its discs, replacing them with new spare parts; after replacement, cover everything back with the cover and check that everything is functioning.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

Fitting the Clutch on a Keeway RKS 150
Fitting the Clutch on a Keeway RKS 150
Rks 150 In this video, you will see instructions on how to correctly fit the clutch on a Keeway RKS 150. First, clean the clutch pack thoroughly and soak the…
How to Replace the Clutch on the Keeway RKS 150?
How to Replace the Clutch on the Keeway RKS 150?
Rks 150 To replace the clutch on the Keeway RKS 150, you need to loosen the screws that secure the cover located on the right side of the bike, in the centra…
How to Change the Engine Oil of a Keeway RKS 150?
How to Change the Engine Oil of a Keeway RKS 150?
Rks 150 To change the engine oil of a Keeway RKS 150, loosen the drain plug of the oil sump, which is located at the central lower part of the vehicle: once …

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos