Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the engine of the Keeway RKS 150?

Model: Keeway Rks 150
Part: Engine

Video tutorial

To disassemble the engine of the Keeway RKS 150, you need to loosen the screws that attach the engine block to the center of the frame: once the fixing screws have been loosened, you can disconnect the connectors and release the intake and exhaust manifolds.

When all these components have been removed, it will be possible to open the engine block by loosening the head and cylinder screws; in this way, you can detach the piston inside from the connecting rod to access the crankshaft and all the components that may need to be replaced.


Posted on 29 January 2025 by ScegliAuto


Related tutorials

Guide to Replacing the Carburettor on the Keeway RKS 150
Guide to Replacing the Carburettor on the Keeway RKS 150
Rks 150 This guide provides instructions for removing and replacing the carburettor on the Keeway RKS 150 motorcycle. First, place your motorcycle on the cen…
How to Change the Engine Oil on a Keeway RKS 150
How to Change the Engine Oil on a Keeway RKS 150
Rks 150 In this tutorial, you will learn how to change the engine oil and oil filter on a Keeway RKS 150 motorcycle by following these simple steps. First, p…
Fitting the Clutch on a Keeway RKS 150
Fitting the Clutch on a Keeway RKS 150
Rks 150 In this video, you will see instructions on how to correctly fit the clutch on a Keeway RKS 150. First, clean the clutch pack thoroughly and soak the…

How to Replace the Clutch on a Royal Enfield Bullet 350

To replace the clutch on your Royal Enfield Bullet 350, loosen the screws securing the cover on the left side of the bike, near the kickstarter. Once you have loosened the screws and removed the cover, you will have access to the underlying components, namely the clutch and the variator. Remove the clutch from its housing by unscrewing the screws that hold it in place and sliding out all the discs that comprise it. After removal, insert the new clutch discs into their housing, securing them all with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos