Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Keeway RKS 150

Model: Keeway Rks 150
Part: Engine oil

Video tutorial

In this tutorial, you will learn how to change the engine oil and oil filter on a Keeway RKS 150 motorcycle by following these simple steps. First, place the motorcycle on its centre stand and start by unscrewing the drain bolt located under the engine using a socket spanner; allow the old oil to drain into a container for about ten minutes.

Next, unscrew the screws of the oil filter cover to remove and replace it. Finally, pour in the new engine oil, filling it to the correct level (approximately 2 litres).


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Keeway RKS 150?
How to Change the Engine Oil of the Keeway RKS 150?
Rks 150 To change the engine oil of the Keeway RKS 150, you need to loosen the screw that secures the drain plug of the oil sump, located at the central lowe…
How to Change the Engine Oil of a Keeway RKS 150?
How to Change the Engine Oil of a Keeway RKS 150?
Rks 150 To change the engine oil of a Keeway RKS 150, loosen the drain plug of the oil sump, which is located at the central lower part of the vehicle: once …
How to Change the Engine Oil on a Keeway RKS 150?
How to Change the Engine Oil on a Keeway RKS 150?
Rks 150 You can change the engine oil on a Keeway RKS 150 by completely removing the drain plug from the oil sump, which is located at the central lower part…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos