Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Bullet 350
Part: Clutch

To replace the clutch on your Royal Enfield Bullet 350, loosen the screws securing the cover on the left side of the bike, near the kickstarter. Once you have loosened the screws and removed the cover, you will have access to the underlying components, namely the clutch and the variator. Remove the clutch from its housing by unscrewing the screws that hold it in place and sliding out all the discs that comprise it. After removal, insert the new clutch discs into their housing, securing them all with the screws and covering everything with the cover.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the Royal Enfield Bullet 350?
How do you replace the clutch of the Royal Enfield Bullet 350?
Bullet 350 To replace the clutch of the Royal Enfield Bullet 350, you need to loosen the screws that secure the side panel of the motorcycle, on the left side i…
How to Replace the Clutch on the Royal Enfield Bullet
How to Replace the Clutch on the Royal Enfield Bullet
Bullet 350 To replace the clutch on the Royal Enfield Bullet, you need to loosen the bolts securing the transmission cover located near the rear wheel on the le…
How to Replace the Battery on a Royal Enfield Bullet 350
How to Replace the Battery on a Royal Enfield Bullet 350
Bullet 350 Today, let's discover the main steps to remove and replace the battery on a Royal Enfield Bullet 350 motorcycle. First, place your motorcycle on the …

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos