Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Bullet 350
Part: Clutch

To replace the clutch of the Royal Enfield Bullet 350, you need to loosen the screws that secure the side panel of the motorcycle, on the left side in the central lower part: once the fixing screws of this panel have been loosened, it will be possible to locate the discs that make up the clutch. By loosening the fixing screws of the discs, it will be possible to extract them all from their housing, so that it is possible to position the new ones: these must be fixed with the appropriate bolts, then covering everything with the panel and checking its operation.

Posted on 6 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Royal Enfield Bullet 350
How to Replace the Clutch on a Royal Enfield Bullet 350
Bullet 350 To replace the clutch on your Royal Enfield Bullet 350, loosen the screws securing the cover on the left side of the bike, near the kickstarter. Once…
How to Replace the Clutch on the Royal Enfield Bullet
How to Replace the Clutch on the Royal Enfield Bullet
Bullet 350 To replace the clutch on the Royal Enfield Bullet, you need to loosen the bolts securing the transmission cover located near the rear wheel on the le…
How to Replace the Battery on a Royal Enfield Bullet 350
How to Replace the Battery on a Royal Enfield Bullet 350
Bullet 350 Today, let's discover the main steps to remove and replace the battery on a Royal Enfield Bullet 350 motorcycle. First, place your motorcycle on the …

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos