Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Bullet 350
Part: Clutch

To replace the clutch on the Royal Enfield Bullet, you need to loosen the bolts securing the transmission cover located near the rear wheel on the left side. Once the cover is removed, you will have access to the components inside. Here, you can loosen the bolts securing the clutch bell and completely remove the discs that comprise it, freeing them from the drive chain. This will allow you to install a new clutch and close everything up with the cover.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Royal Enfield Bullet 350
How to Replace the Clutch on a Royal Enfield Bullet 350
Bullet 350 To replace the clutch on your Royal Enfield Bullet 350, loosen the screws securing the cover on the left side of the bike, near the kickstarter. Once…
How do you replace the clutch of the Royal Enfield Bullet 350?
How do you replace the clutch of the Royal Enfield Bullet 350?
Bullet 350 To replace the clutch of the Royal Enfield Bullet 350, you need to loosen the screws that secure the side panel of the motorcycle, on the left side i…
How to Replace the Battery on a Royal Enfield Bullet 350
How to Replace the Battery on a Royal Enfield Bullet 350
Bullet 350 Today, let's discover the main steps to remove and replace the battery on a Royal Enfield Bullet 350 motorcycle. First, place your motorcycle on the …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos