Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw G310 Gs
Part: Engine oil

To change the motor oil of a BMW G310 GS, start by placing the motorcycle on a center stand or on a stable surface to ensure balance. Make sure the engine is warm, as warm oil flows more easily. Before starting, gather all the necessary items: a suitable key for the drain plug, a container to collect the used oil, a new oil filter, and the specific motor oil recommended by the manufacturer. Locate the oil drain plug under the engine and slowly unscrew it, allowing the oil to drain completely into the container. Meanwhile, remove the oil filter using the appropriate tool. Once removed, replace it with the new one, making sure to lightly lubricate the filter seal with some fresh oil to ensure optimal sealing. Tighten the drain plug, being careful not to over-tighten it to avoid damaging the threading. Next, use the designated fill cap to add the new oil, respecting the quantity specified in the user manual. Start the engine for a few seconds, turn it off, and check the oil level using the dipstick or indicator. Add more oil if necessary. Dispose of the used oil following local regulations.

Posted on 26 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the BMW G310 GS
How to Change the Engine Oil of the BMW G310 GS
G310 Gs To change the engine oil of the BMW G310 GS, you need to loosen the bolts securing the engine guard plate located in the lower central area of the bi…
How to perform a service (oil and filter change) on a BMW G310 GS?
How to perform a service (oil and filter change) on a BMW G310 GS?
G310 Gs In this brief guide, we will see how to replace the engine oil and the oil filter, performing the regular maintenance service on a BMW G310 GS. First…
How to Change the Engine Oil of the BMW G310 GS
How to Change the Engine Oil of the BMW G310 GS
G310 Gs To change the engine oil of the BMW G310 GS, loosen the bolts securing the engine guard located at the central lower area of the bike. Once these bol…

How to Replace the Engine Cover on a Honda CB 650R

This guide provides instructions for removing and replacing the engine cover on a Honda CB 650R motorcycle, following these simple steps. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew all the screws from the cover or engine casing found on the right, as shown in the video. At this point, install the new cover, ensuring to replace the gasket and clean the base thoroughly.

Watch the video!


by ScegliAuto

More videos