Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gasgas
    3. :
  3. Mc 250f
    4. : Carry out the service (oil change) on Gasgas MC250F

Model: Gasgas Mc 250f
Carry out the service (oil change) on Gasgas MC250F

Today we will see, in this video tutorial, how to carry out the ordinary maintenance service, by changing the oil, on a Gasgas MC 250F motorcycle. First we place our bike on the stand; then we are going to remove the vent bolt that we find under the engine, letting it drain for about ten minutes. At this point we are going to open the filling hole to fill the crankcase with the new oil, up to the maximum level; the video also shows how to remove and replace the spark plug and the air filter: the latter is actually washed and then reassembled!


Posted on 6 February 2024 by ScegliAuto

How to replace the front brake pads on Kawasaki Z1000

Today we will see, in this short and simple guide, the instructions on how to disassemble and replace the front brake pads of the Kawasaki Z1000 motorcycle. First of all we put the stand on our motorbike and we begin to unscrew the fixing screws of the front brake caliper, in order to remove it from the disc; then we remove the central pin to remove the old brake pads, pressing on the caliper piston to make it retract, as shown in the video. At this point we install the new brake pads, of excellent quality, inserting them in the correct direction, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos