Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the brake pads of the Peugeot Geopolis 300, you will need to loosen the screws that secure the calipers to their corresponding housings on the front and rear brake discs: once the fixing screws have been loosened, it will be possible to proceed to detach the calipers from the appropriate discs in order to lever out the pins and free the pads from inside their seat. At this point, it will be possible to insert the new ones, securing them with the corresponding pins and verifying that everything works correctly even after the replacement.

Posted on 7 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the coolant in the Peugeot Geopolis 300?
How do you replace the coolant in the Peugeot Geopolis 300?
Geopolis 300 To replace the coolant of the Peugeot Geopolis 300, you must first expel the old liquid: you need to open the drain valve located at the lower rear p…
How do you replace the fuel filter of the Peugeot Geopolis 300?
How do you replace the fuel filter of the Peugeot Geopolis 300?
Geopolis 300 In order to replace the fuel filter of the Peugeot Geopolis 300, you will need to loosen the screws that secure the panel located in the upper part o…
How do you disassemble the engine of the Peugeot Geopolis 300?
How do you disassemble the engine of the Peugeot Geopolis 300?
Geopolis 300 It will be possible to disassemble the engine of the Peugeot Geopolis 300 by loosening the screws that fix the panels that make up the fairing and wr…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos