Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will guide you through removing and replacing the front headlight bulb of the Honda CB 500F motorcycle. First, place the bike on its stand and begin by removing the front headlight to access the bulb. Disconnect the electrical connector of the bulb and remove the rubber cover as shown in the video. Now, replace the dipped beam bulb with a new one of the correct type and with the same fitting (in this case, H4); reassemble the bulb into the headlight unit and finally refit the front headlight!

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter of the Honda CB 500F
How to Replace the Air Filter of the Honda CB 500F
Cb 500f Today, we will go through the main instructions that will allow us to remove and replace the air filter of the Honda CB 500F motorcycle. First, place…
How to Replace the Air Filter on a Honda CB 500F?
How to Replace the Air Filter on a Honda CB 500F?
Cb 500f In this video, we will see how to disassemble and replace the engine air filter on a Honda CB 500F in simple steps. First, remove the seat of your mo…
How to Service the Honda CB 500F
How to Service the Honda CB 500F
Cb 500f Today, we will guide you through the necessary steps to service the Honda CB 500F, replacing the engine oil and oil filter. First, place your bike on…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos