Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Peugeot Elystar 50
Part:

In this video tutorial, you will learn how to disassemble and replace the rollers in the variator of the Peugeot Elystar 50 scooter in simple and quick steps. First, place the central stand on your scooter and start by removing the clutch cover by unscrewing its screws; then unscrew the nut of the fan and the clutch bell, subsequently removing the belt. At this point, disassemble the variator and replace the rollers found inside with the correct type; insert them properly and reassemble your transmission, following the video tutorial to the end!

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to install the belt and variator of the Peugeot Elystar 50
How to install the belt and variator of the Peugeot Elystar 50
Elystar 50 In this guide, you will learn how to service the belt and variator of the Peugeot Elystar 50 scooter. First, place your scooter on the centre stand a…
How to Replace the Carburettor of a Peugeot Elystar
How to Replace the Carburettor of a Peugeot Elystar
Elystar 50 Before you begin, remove the left side fairing of your Peugeot Elystar. This will give you access to the carburettor. Start by disconnecting the rele…
Replacing the Spark Plug on the Peugeot Elystar 50
Replacing the Spark Plug on the Peugeot Elystar 50
Elystar 50 In today's tutorial, you will learn how to remove and replace the spark plug on the engine of the Peugeot Elystar 50 two-stroke scooter. First, place…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos