Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Spark Plug on the Peugeot Elystar 50

Model: Peugeot Elystar 50
Part: Spark plugs

Video tutorial

In today's tutorial, you will learn how to remove and replace the spark plug on the engine of the Peugeot Elystar 50 two-stroke scooter. First, place the scooter on its centre stand and start by removing the cap or connector from the spark plug; then use a 12 mm socket wrench with an extension to unscrew and remove the spark plug, as shown in the video.

At this point, replace the spark plug with a new one of the same heat rating; then screw it in by hand before tightening it with the wrench, following the video tutorial to the end!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the Carburettor of a Peugeot Elystar
How to Replace the Carburettor of a Peugeot Elystar
Elystar 50 Before you begin, remove the left side fairing of your Peugeot Elystar. This will give you access to the carburettor. Start by disconnecting the rele…
How to install the belt and variator of the Peugeot Elystar 50
How to install the belt and variator of the Peugeot Elystar 50
Elystar 50 In this guide, you will learn how to service the belt and variator of the Peugeot Elystar 50 scooter. First, place your scooter on the centre stand a…
How to Replace the Rollers in the Variator of the Peugeot Elystar 50
How to Replace the Rollers in the Variator of the Peugeot Elystar 50
Elystar 50 In this video tutorial, you will learn how to disassemble and replace the rollers in the variator of the Peugeot Elystar 50 scooter in simple and qui…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos