Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
Searched for Suzuki Alto Remove Gearbox - To remove and replace the gearbox on a Seventh generation Suzuki Alto or Nissan Pixo, you will need to raise the vehicle and drain the gearbox oil. Then, undo both lower arms by removing the single bolt and release them from the hubs.
Page generated automatically based on user searches (*)
How do you remove the Suzuki Alto gearbox?
Suzuki Alto (2008-2014 / MK 7) .. In order to remove the gearbox of the Suzuki Alto you have to go and lift the car by means of a bridge or a jack, so that you can have access..
Instructions for disassembling the clutch on Suzuki Alto 1.0
Suzuki Alto (2008-2014 / MK 7) .. In this guide we will see the main steps to remove and replace the clutch plates on the 2010 Suzuki Alto 1.0 petrol engine. First we open the engine.. .. disconnect the clutch cable that we find on the gearbox. At this point we disconnect the tube that we find above the gearbox. Let's move to the lower..
Where is the fuse box of the Suzuki Alto located?
Suzuki Alto (2008-2014 / MK 7) .. In this new mini guide dedicated to your Suzuki Alto (year 2008-2014), we will find out how to easily locate the box containing all the various.. .. located on the left side of the dashboard and remove it with your own hands, being careful not to damage it. Once you have completed this operation,..
How to replace the spark plugs on a Suzuki Alto
Suzuki Alto (2008-2014 / MK 7) .. we will have to open the front hood of our Suzuki Alto. So let's start by disassembling and removing the air filter block, unscrewing the fixing.. .. and electrical plugs. Next, we will have to remove the bolts that secure the plugs connected to the spark plugs, and then disconnect the plugs themselves...
How do i replace the Suzuki Alto battery?
Suzuki Alto (2008-2014 / MK 7) .. In order to replace the Suzuki Alto battery, you need to open the hood, so that you have access to the components inside the.. .. you will find the battery. To be able to remove it from its housing, it will be necessary to disconnect the power cables and unscrew the fixing..
What problems does the Suzuki Alto have?
Answer: The fuel pump gasket of the Suzuki Alto is defective and could cause fuel leaks during refueling; moreover, even braking with ABS intervention is not ... read all

Posted on 8-06-2023

Read Answer
Why don't the brake lights of a Suzuki Alto come on?
Answer: The brake light bulbs of a Suzuki Alto do not light up because most likely the relative fuse has blown. So to solve the problem we will only have to r... read all

Posted on 3-05-2021

Read Answer
Where is the fuse box located in the Suzuki Alto?
Answer: The first fuse box of the Suzuki Alto is located inside the engine compartment. The other one, however, is inside the passenger compartment and is loc... read all

Posted on 30-04-2023

Read Answer
Where is the brake fuse of a Suzuki Alto located?
Answer: The brake fuse of a Suzuki Alto is located inside the fuse box. In turn, the fuse box is located inside the engine compartment, near the vehicle batte... read all

Posted on 2-05-2021

Read Answer
What are the problems with the reduction gears of a Suzuki Jimny?
Answer: When it comes to engaging the 4x4 or the reduced gears on the Suzuki Jimny gearbox, first of all it's better not to do it when you're driving - even i... read all

Posted on 11-12-2022

Read Answer
(*) This page is automatically generated on the basis of user research and does not in any way express the thought of ScegliAuto.com. If you believe that this page should be removed, write to info@scegliauto.com, specifying the page and the reason why you are requesting the removal.

Pagine correlate:

  1. Video tutorial
    2. >
  2. Suzuki
    3. >
  3. Alto
How to Remove and Replace the Gearbox on a Seventh Generation Suzuki Alto or Nissan Pixo: To remove and replace the gearbox on a Seventh generation Suzuki Alto or Nissan Pixo, you will need to raise the vehicle and drain the gearbox oil. Then, undo both lower arms by removing the single bolt and release them from the hubs. Remove both the front gearbox mounting and the mounting bracket from the gearbox. Lower the transmission jack about 50mm to aid gearbox removal. It is recommended to lift the car using a bridge or a jack. Make sure to follow a video tutorial or seek professional assistance for a step-by-step guide.

Information generated automatically based on external sources by AI systems and which may in some cases be inaccurate or incorrect.