Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Alto
    4. : Instructions for disassembling the clutch on Suzuki Alto 1.0

Suzuki Alto - Video tutorial

Model: Suzuki Alto MK 7 - Years 2008-2014
Part: Clutch
Operation: Instructions for disassembling the clutch on Suzuki Alto 1.0

In this guide we will see the main steps to remove and replace the clutch plates on the 2010 Suzuki Alto 1.0 petrol engine. First we open the engine hood of our car and start by removing the battery and the battery holder, unscrewing all the fixing screws ; after which we disconnect the clutch cable that we find on the gearbox. At this point we disconnect the tube that we find above the gearbox. Let's move to the lower part of the car to unscrew all the screws of the gearbox, thus extracting the front axle shaft; then replace the clutch.


Posted on 3 March 2024 by ScegliAuto



How to adjust the clutch cable on Suzuki Alto (2013)
Suzuki Alto (2008-2014 / MK 7) In today's video tutorial we will see the main instructions that will allow us to correctly adjust the clutch cable, in order to remove the annoying
How to replace the spark plugs on a Suzuki Alto
Suzuki Alto (2008-2014 / MK 7) Before starting, we will have to open the front hood of our Suzuki Alto. So let's start by disassembling and removing the air filter block, unscrewin
Where is the fuse box of the Suzuki Alto located?
Suzuki Alto (2008-2014 / MK 7) In this new mini guide dedicated to your Suzuki Alto (year 2008-2014), we will find out how to easily locate the box containing all the various fuses

Other guides that may interest you

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos