|
Do it yourself
| |||
| ||||
What to do if the gearbox is noisy in the Fiat Panda?
Answer: After a few thousand kilometers it could happen that the gearbox of our Fiat Panda becomes a little noisy, often only when the gear is engaged or in p...
read all
Posted on 10-03-2023
Where is the outside temperature sensor on the Fiat Panda located?
Answer: The external temperature sensor of the Fiat Panda is located in the rear-view mirror on the driver's side; to access it, simply unclip and remove the ...
read all
Posted on 4-02-2023
What problems does the viscous coupling of the Fiat Panda 4x4 have?
Answer: The viscous coupling of the Fiat Panda 4x4 is often subject to damage and its breakage prevents the operation of the four-wheel drive. To solve the pr...
read all
Posted on 12-01-2023
Where is the starter motor located on the Fiat Panda?
Answer: The starter motor on the Fiat Panda is located at the top of the engine compartment. To locate it and gain access to it, open the engine hood and look...
read all
Posted on 23-10-2022
What good is the warning light with a triangle and an exclamation point on the Fiat Panda?
Answer: The amber yellow warning light depicting a triangle and an exclamation point is used to indicate a generic fault. It is usually connected to electroni...
read all
Posted on 16-10-2022
What does the red light indicate with a steering wheel in the Fiat Panda?
Answer: The red light depicting a steering wheel in the Fiat Panda indicates the presence of a malfunction in the power steering system. When this warning lig...
read all
Posted on 1-07-2022
What does the white light mean in a Panda Hybrid?
Answer: In a Fiat Panda Hybrid, the white light indicates the activation of the BSG generation system which allows, when the car is braking or decelerating, t...
read all
Posted on 14-06-2022
How to adjust the headlights in the Fiat Panda?
Answer: To adjust the headlights of the Fiat Panda we have 2 options. The first is to switch on the low beams and vary the angle by pressing the two buttons o...
read all
Posted on 17-05-2022
How to set the time in the Fiat Panda?
Answer: Changing the timetable in the Fiat Panda is very simple. With the ignition on, press the Set button on the center console and navigate to the "Adjust ...
read all
Posted on 10-05-2022
How to reset the expired service message on the 2019 Fiat Panda?
Answer: After turning on the ignition but not the engine, press and hold the accelerator pedal fully down, while pressing the brake pedal seven times. Keep th...
read all
Posted on 18-04-2022
How do you remove the headrest in the Fiat Panda?
Answer: Removing the headrest in the Fiat Panda is a relatively simple job, but one that is certainly not helped by the design of the seat itself. In fact, th...
read all
Posted on 29-03-2022
Where is the camshaft sensor of the Fiat Panda Twinair located?
Answer: The Fiat Panda Twinair camshaft sensor is in a rather awkward position: in fact on 0.9-liter Twinair engines the sensor is placed in a central positio...
read all
Posted on 23-03-2022
Where is the oil pressure sensor located in the Fiat Panda?
Answer: In the Fiat Panda, we can access the oil pressure sensor by going under the engine compartment. It is located to the right of the oil filter, just beh...
read all
Posted on 13-03-2022
Where is the Fiat Panda coolant temperature sensor located?
Answer: The sensor that detects the temperature of the coolant (commonly called the water bulb) is located on the side of the engine block. In fact, the piece...
read all
Posted on 15-02-2022
How to reset the expired service of the Fiat Panda?
Answer: To reset the expired service of the Fiat Panda, switch on the instrument panel and keep the accelerator pedal pressed. While holding it down, press th...
read all
Posted on 6-02-2022
What to do if the code error message appears in the Fiat Panda?
Answer: If you get the message "code error" after installing a new car radio in your Fiat Panda, it could be due to a wrongly entered code. If it does not dep...
read all
Posted on 3-01-2022
Where is the spare wheel on the Fiat Panda?
Answer: The spare wheel of your Fiat Panda or the spare wheel are usually stored in the trunk of the car. The jack and tools can be located near the wheel or ...
read all
Posted on 27-12-2021
How many km can the Fiat Panda travel in reserve?
Answer: The Fiat Panda reserve warning light comes on when 5 liters of fuel remain in the tank. Taking into account the average consumption of the car, with t...
read all
Posted on 11-11-2021
What does the "ESC" warning light indicate in the Fiat Panda?
Answer: ESC stands for Electronic Stability Control. The warning light relating to this system comes on when it comes into operation due to the poor grip cond...
read all
Posted on 3-11-2021
What is the fuse of the fuel pump of the Fiat Panda?
Answer: The fuel pump fuse in the Fiat Panda is located in the engine compartment fuse box and is placed vertically to the right of the battery. The 15A fuse ...
read all
Posted on 2-10-2021
How many reversing lights are there on the Fiat Panda?
Answer: There are two reversing lights on the Fiat Panda: these are located on the rear lights and light up yellow when reverse gear is engaged. They light up...
read all
Posted on 27-09-2021
What does the warning light with a yellow triangle and an exclamation point indicate on the Fiat Panda?
Answer: The warning light with a yellow triangle and an inscribed exclamation point that may appear on the instrument panel of the Fiat Panda, notifies the us...
read all
Posted on 23-09-2021
How do you access the on-board menu of the Fiat Panda?
Answer: To access the on-board computer menu of the Fiat Panda, just use the three buttons located on the left side of the dashboard, under the radio. In fact...
read all
Posted on 11-09-2021
How to turn on the air conditioning of a Fiat Panda?
Answer: Let's start by going to sit on the driver's seat of our Fiat Panda, and then start the engine. After that we will have to rotate the knob of the fan u...
read all
Posted on 6-09-2021
What does the "SHIFT" warning light mean on a Fiat Panda?
Answer: When the "SHIFT" warning light comes on in the instrument panel of our Fiat Panda, the machine wants to inform us that it is advisable to change gear,...
read all
Posted on 30-08-2021
How do you reset the Fiat Panda Service warning light?
Answer: To reset the Fiat Panda Service warning light, switch on the instrument panel and press the "Set" button on the central dashboard. At this point you h...
read all
Posted on 3-07-2021
Start and stop not available on Fiat Panda: what to do?
Answer: If the start and stop system has stopped working on your Fiat Panda, the causes may be the following: the steep slope of the road, the imperfect closi...
read all
Posted on 15-05-2021
Where are the water bleed valves of the Fiat Panda?
Answer: With reference to the 1.2 petrol engine of the Fiat Panda, there are two bleed or bleed screws for the cooling system of the engine: one located in th...
read all
Posted on 20-12-2019
Where is the horn of the Fiat Panda?
Answer: The horn of the Fiat Panda is located in the front part of the vehicle, at the bottom left on the driver's side just behind the bumper: it is not imme...
read all
Posted on 24-02-2018
|
See also |
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2025 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |