Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Alfa Romeo Alfa Romeo Gt - Seat

Seat Alfa Romeo Alfa Romeo Gt (2003-2010 / mk 1)

Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1)
How to Remove the Rear Seats in the Alfa Romeo GT?
Removing the rear seats in the Alfa Romeo GT is a very simple operation; let's see how to proceed in this tutorial. First, enter the vehicle, then unscrew the …Read all…
Posted on 29 August 2026 by ScegliAuto
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1)
How to Remove the Front Seat of an Alfa Romeo GT
Replace the front seat if damaged on an Alfa GT. Here’s how to remove it. Move the seat back (using the metal handle) and lift the seat base, then unscrew …Read all…
Posted on 10 April 2026 by ScegliAuto
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1)
How to Remove the Front Seat of an Alfa Romeo GT
How to remove the front seat of an Alfa Romeo GT? This guide explains the procedure. First, move the seat forward (using the electric buttons if available) and …Read all…
Posted on 31 March 2026 by ScegliAuto
Antenna (1) Car stereo (1) Battery (1) Air vents (1) Key (1) V-belt (1) Checks and maintenance (2) Shifter boot (1) Bearing (1) Brake rotors (1) Tail light (2) Air filter (2) Grille (1) Light bulb (1) Headlight bulb (4) Tail light bulb (2) License plate light (1) Handle (2) Transmission fluid (1) Door trim panel (2) Front bumper (1) Rear bumper (1) Brake pads (1) Fuel pump (1) Fuse box (4) Seat (3) Door lock (1) Side mirror (1) Warning light – error code (2) Service warning light (1) Fuel cap (1) Thermostat (1) Center console tunnel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos