Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Malibu
    4. : 2008-2012 (MK 7)

Chevrolet Malibu Years 2008-2012 (MK 7)

Chevrolet Malibu (2008-2012 / MK 7)
What is the fuse layout for the Chevrolet Malibu?
In this video, we can see where the fuse boxes of the Chevrolet Malibu are located and what their respective diagrams are, to consult in case we need to check …read all…
Posted on 18 March 2024 by ScegliAuto
Chevrolet Malibu (2008-2012 / MK 7)
Where are the windshield wiper relays located in the Chevrolet Malibu?
If the windshield wipers of our Chevrolet Malibu suddenly stopped working, we can first check the status of the respective relays whose position is indicated …read all…
Posted on 28 February 2024 by ScegliAuto
Chevrolet Malibu (2008-2012 / MK 7)
The procedure to replace the cabin filter in a Chevrolet Malibu.
In this video tutorial, we can see how to perform the procedure to replace the cabin filter in a Chevrolet Malibu: first of all, we go to buy a new cabin …read all…
Posted on 14 July 2023 by ScegliAuto
Car stereo (1) Key (6) -board computer (1) Checks and maintenance (1) Air filter (2) Cabin air filter (4) Petrol filter (1) Engine oil (1) Instrument cluster (3) Fuse box (3) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos