Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the ventilation nozzles of the Dacia Logan

Model: Dacia Logan MK 2 - Years 2012-2022
Part: Air vents

In this brief guide, we will see the steps that will allow us to disassemble and replace the air vents of the dashboard of the Dacia Logan, but also of the Sandero. First of all, we get on board the car and start removing the plastic cover that we find around the air vent, using a thin lever like a screwdriver; pay attention not to damage the plastic parts of the dashboard. At this point, we can pull and detach the air vent, replacing it if necessary with the new one; apply the reverse process for reassembly!

Posted on 20 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing Front and Rear Logos and Bumper
Removing Front and Rear Logos and Bumper
Dacia Logan Video on assembling and disassembling body parts of the Dacia Logan. …
How to Remove the Centre Console with the Radio from a Dacia Logan
How to Remove the Centre Console with the Radio from a Dacia Logan
Dacia Logan (2012-2022 / MK 2) Let’s see how to remove the centre console with the radio from a Dacia Logan. Use a lever to remove the side plastics around the radio control panel,…
How to install the armrest on a Dacia Logan vehicle
How to install the armrest on a Dacia Logan vehicle
Dacia Logan (2012-2022 / MK 2) Today we will explain how to install the armrest on a Dacia Logan car. We begin the installation by positioning the armrest in place and using a scre…

Other guides you may be interested in

How to Replace the Air Filter on a Citroen C4

How do you replace the engine air filter on a Citroen C4? Watch this video to see how to proceed. Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the front bonnet, securing it. Using a screwdriver, unscrew the air kit, disconnect the engine air intake hose and the metal clamp pin. Remove the air filter box from the vehicle body, then extract the worn air filter and insert a new one, ensuring it fits snugly against the walls of the box. Finally, reattach the air box panel and tighten the screws. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos