Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the motor oil of a Ducati Panigale V4, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and place the motorcycle on a stable stand. Locate the oil drain plug located under the engine. Position a collection container under the plug. Use a wrench to unscrew the drain plug and let the oil drain completely into the container. Once the oil has been fully drained, screw the drain plug back in making sure it is tight. Find the oil fill cap, remove it, and insert a funnel. Slowly pour the specified new oil from the owner's manual until reaching the recommended amount. After filling with the new oil, put the fill cap back in place and tighten it securely. Start the engine and let it run for a few minutes to allow the oil to circulate, then turn off the engine and check for any leaks.

Posted on 5 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Ducati Panigale V4?
How to Change the Engine Oil in the Ducati Panigale V4?
Panigale V4r This tutorial shows how to change the engine oil in the Ducati Panigale V4, a very simple and quick operation. First, ensure the engine is sufficient…
How to Change the Engine Oil in a Ducati Panigale V4?
How to Change the Engine Oil in a Ducati Panigale V4?
Panigale V4r In this tutorial, see how to change the engine oil in the Ducati Panigale V4, a very simple and quick operation to perform every 12 months. First, en…
How to Change the Engine Oil and Oil Filter on a Ducati Panigale V4
How to Change the Engine Oil and Oil Filter on a Ducati Panigale V4
Panigale V4r In this video, you will see the steps to change the engine oil and oil filter while performing routine maintenance on a 2020 Ducati Panigale V4. Firs…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos