Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Moto Morini
    3. : X Cape 650
This guide provides the necessary instructions on how to remove and replace the air filter of the Moto Morini X Cape 650 engine. First, place the motorcycle on its centre stand and begin by removing the fuel tank and the rider's seat by unscrewing all the fixing screws. Then, unscrew the screws of the air filter box cover to remove the cartridge. At this point, install and insert the new air filter in the correct orientation, then reassemble the filter box and finally the tank, applying the reverse procedure!

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a Moto Morini X Cape 650?
How to Replace the Exhaust on a Moto Morini X Cape 650?
X Cape 650 To replace the exhaust on a Moto Morini X Cape 650, first loosen the bolts securing the exhaust to the underside of the bike. After loosening the mou…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos