Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Remove the black side plastics between the tank and the handlebars. They are secured with two 5 mm screws located just below the tank. Once the two screws are removed, gently pry with your hands to lift the plastic (they break easily) until it is removed. Next, unscrew the two screws on the side brackets that secure the glass. Now move on to the screws that secure the front fairing from underneath, as shown in the video. Finally, unscrew the side screws located between the handlebars and the front fairing, which you can remove along with the windscreen. As you can see, this is a moderately difficult operation.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Ducati Panigale V4R?
How to Replace the Clutch on a Ducati Panigale V4R?
Panigale V4r To replace the clutch on the Ducati Panigale V4R, loosen the screws securing the cover located on the right side of the bike, in the lower central ar…
How do you replace the exhaust on the Ducati Panigale V4R?
How do you replace the exhaust on the Ducati Panigale V4R?
Panigale V4r To replace the exhaust installed on the Ducati Panigale V4R, you need to loosen the screws that secure the exhaust terminal to its housing on the rig…
How to Remove the Front Wheel and Brake Pads of the Ducati Panigale V4
How to Remove the Front Wheel and Brake Pads of the Ducati Panigale V4
Panigale V4r This guide provides the main instructions for removing and replacing the front wheel and brake pads of the Ducati Panigale V4 motorcycle. First, lift…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos