Do it yourself
Frequently asked questions about cars and motorcycles
In this video tutorial, you will see how to disassemble and replace the clutch cover on a Ducati Panigale V4 motorcycle. First, unscrew all the fastening screws of the clutch cover using a Torx key to remove it; then use a 10 mm socket to unscrew the three bolts of the clutch plate. At this point, replace your cover with the new one, changing the gaskets and correctly inserting the bearing; place the springs and the pressure plate and reassemble the clutch cover!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Panigale V4r To replace the clutch on the Ducati Panigale V4R, loosen the screws securing the cover located on the right side of the bike, in the lower central ar…
Panigale V4r This tutorial shows how to change the engine oil in the Ducati Panigale V4, a very simple and quick operation. First, ensure the engine is sufficient…
Panigale V4r In this tutorial, see how to change the engine oil in the Ducati Panigale V4, a very simple and quick operation to perform every 12 months. First, en…

Replacing the Headlight Bulb on the Yamaha Mio 125

This brief guide will show you how to remove and replace the headlight bulb on the Yamaha Mio 125 scooter in simple and quick steps. First, place the scooter on the centre stand and begin to remove the front headlight; to do this, unscrew the fastening screws located at the bottom and disconnect the electrical connector of the light found at the back, as illustrated in the video. At this point, remove and replace the bulb with a new one of the correct type and with the same fitting; finally, reassemble the front headlight with its front fairing!

Watch the video!


by ScegliAuto

More videos