Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Roof Bars on a Fiat Punto 5-Door

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Roof rack bars

Hello, today we will see how to install roof bars on our Fiat Punto. After selecting the roof bars that best suit our car, we can proceed with the installation. Take the front bar and position it on the roof of the car, aligning it perfectly with the hole found when opening the door. Now take the bracket that will hold the roof bars in place. First, install the upper bolt, then install the bolt that will secure the roof bars. Repeat this procedure for the other side and for the rear bar.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fit Roof Bars on a Fiat Punto Evo
How to Fit Roof Bars on a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. the car. Place the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten.. …
Fitting Roof Bars on a Fiat Punto Evo - Grande Punto
Fitting Roof Bars on a Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This video tutorial provides instructions for fitting roof bars on a Fiat Punto Evo, as well as on the Grande Punto. There are various types of roof …
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. this guide, learn the steps to remove the front door panel and window regulator motor on the Fiat Grande Punto, as well as the Punto Evo. First, open.. …

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos