Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Headlight bulb

Today, you will learn how to replace the front headlamp bulb on a second-generation Fiat Punto. First, open the car's bonnet and see how to replace the bulb in simple steps: remove the protective cover of the bulbs and disconnect the electrical connector of the bulb itself by pulling it outwards; then unclip the metal spring to extract the H7 bulb. At this point, replace it with a new one with the same fitting; the video also shows how to replace the position light and then the reassembly!

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Fiat Punto 2005
How to replace the front headlight bulb of the Fiat Punto 2005
Fiat Punto (1999-2011 / MK 2, 188) If you own a 2005 Fiat Punto and want to replace the headlight bulb, then read the following guide and follow the steps described. First, lift the fr…
How to Replace the Front Headlamp Bulb of a Fiat Punto
How to Replace the Front Headlamp Bulb of a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…
How to Replace the Fog Light Bulb on a Fiat Punto
How to Replace the Fog Light Bulb on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) To replace the front fog light bulb, first lift the car using a jack and then remove the wheel corresponding to the bulb you want to replace. Once th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos