Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install an AUX-IN Jack on a Fiat Punto Evo India

Model: Fiat Punto Evo India MK 1 - Years: 2014, 2015, 2016, 2017, 2018

Video tutorial

To install an AUX-IN jack in your Fiat Punto Evo India, first remove the radio from its housing. You can do this with special clips that fit into the buttons and allow you to pull it out. Simply connect the wires of the jack (red and black) to the radio terminal and reconnect it. The wire with the jack can be routed through the rear plastics easily, either from the driver side or the passenger side, depending on your preference for convenience.

This way, you can connect your phone and play your favorite music from your device.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Shock Absorber on a Fiat Punto Evo India?
How to Replace the Front Shock Absorber on a Fiat Punto Evo India?
Fiat Punto Evo India (2014-2018 / MK 1) To replace the front shock absorber on a Fiat Punto Evo India, lift the car with a jack or lift so that the wheel corresponding to the shock absorber…
How to Remove and Clean the Intercooler on the Fiat Punto Evo India
How to Remove and Clean the Intercooler on the Fiat Punto Evo India
Fiat Punto Evo India (2014-2018 / MK 1) This brief and simple guide shows you how to remove and clean (or replace) the intercooler on the Fiat Punto Evo India, following the instructions be…
How to Replace the Air Filter on the Fiat Punto Evo India
How to Replace the Air Filter on the Fiat Punto Evo India
Fiat Punto Evo India (2014-2018 / MK 1) In this new guide dedicated to the Fiat Punto Evo India, discover how to properly replace one of the most important components in the engine compartm…

    Frequently Asked Questions

    • Punto Evo India 2014-2018 - Where is the horn of the Fiat Punto Evo located? Read answer

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos