Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Service the Window Regulator Motor

Model: Fiat Punto MK 2, 188 - Years 1999-2011

Video tutorial
Detailed instructions - If you are experiencing issues with the electric window regulator in your car, you can proceed to dismantle the window lifting assembly along with the motor. The following description contains all the necessary information for servicing. First, remove the upper panel of the motor to find the cable movement pulley and the plastic gear beneath it. Usually, the gear wears out and the teeth become stripped, which is why the window regulator fails. To repair it, simply replace this gear.

Updated on 4 June 2026 by ScegliAuto


Related tutorials

Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this guide, learn the steps to remove the front door panel and window regulator motor on the Fiat Grande Punto, as well as the Punto Evo. First, o…
Remove the Window Regulator Motor on a Fiat Grande Punto
Remove the Window Regulator Motor on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Do you want to remove the window regulator motor from the rear door on a Fiat Grande Punto? First, use a plastic lever to remove the door trim pieces…
How to Replace the Electric Window Motor on the Fiat Punto
How to Replace the Electric Window Motor on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) If you want to independently replace the electric window motor on this vehicle, the description below outlines the necessary steps to achieve the goa…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to set the clock on the Vespa 125 Primavera?

To set the clock on the Vespa 125 Primavera, press and hold the black button located just below the black knob on the bike: keep the button pressed until the hour number starts to flash. Once it is flashing, you can change the hours with single presses of the same button; then, by pressing and holding the button again, the hour number will stop flashing and the minute number will start to flash, which can be modified in the same way, confirming the input by holding the button.

Watch the video!


by ScegliAuto

More videos