Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To set the clock on the Vespa 125 Primavera, press and hold the black button located just below the black knob on the bike: keep the button pressed until the hour number starts to flash. Once it is flashing, you can change the hours with single presses of the same button; then, by pressing and holding the button again, the hour number will stop flashing and the minute number will start to flash, which can be modified in the same way, confirming the input by holding the button.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on the Piaggio Vespa 125 LX?
How to Set the Clock on the Piaggio Vespa 125 LX?
Vespa 125 Primavera To set the clock on the Piaggio Vespa 125 Primavera, insert the ignition key into the ignition switch and turn it to power on the display: then press…
How to Set the Time on the Piaggio Vespa 125 Primavera Scooter?
How to Set the Time on the Piaggio Vespa 125 Primavera Scooter?
Vespa 125 Primavera In this tutorial, we will see how to set the time on the Piaggio Vespa 125 Primavera scooter, an extremely simple and quick operation, to be done aft…
How to Set the Clock on a Piaggio Vespa 125 Primavera
How to Set the Clock on a Piaggio Vespa 125 Primavera
Vespa 125 Primavera In this brief guide, you will learn how to set the clock on the Piaggio Vespa 125 Primavera. First, place it on the centre stand and turn on the inst…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos