Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Car Shock Absorbers

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Shocks

When your car has covered many miles, it may be necessary to replace the shock absorbers, which serve to dampen the car's bumps and ensure safety while cornering. The procedure for replacing the shock absorbers can be done without the help of a mechanic. Once you have obtained the new shock absorbers, lift the car with a jack, open the bonnet, and remove all the screws located above the shock absorber and also the two screws of the driveshaft. Once this operation is done, you can place the new shock absorber in the same position as the old one.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (1999-2011 / MK 2, 188) Replacing one or more shock absorbers on your Fiat Punto in a timely manner is very important as it significantly reduces the risk of any accidents a…
Fiat Punto (1999-2011 / MK 2, 188) Lift the car on a ramp and raise it to a comfortable working height. Remove the front tyre. Now detach the brake cable and brake oil supply from thei…
Fiat Punto (1999-2011 / MK 2, 188) Replacing the rear shock absorbers is very straightforward to do yourself: it essentially involves removing the bolts that secure the eyes of the sho…

    Frequently Asked Questions

    • Punto 1999-2011 - How much does it cost to replace the Fiat Punto shock absorbers? Read answer
    • Punto 2005-2018 - How much does it cost to replace the shock absorbers in the Fiat Grande Punto? Read answer
    • Punto 1993-1999 - How much does it cost to replace the boot shock absorbers on a Fiat Punto? Read answer
    • Punto 2005-2018 - How much does it cost to change the shock absorbers on the Fiat Grande Punto? Read answer

How to Remove the Driver's Side Airbag (Steering Wheel) on a BMW 3 Series

How to remove the driver's side airbag (steering wheel) on a BMW 3 Series? This operation is very simple if you follow the steps. Let's see in this guide how to proceed: insert a medium-length screwdriver into the rear slots on the steering wheel and turn until you release the clips that hold the airbag. Once the airbag is disconnected, disconnect the power connectors and remove it from the steering wheel. For reinstalling the airbag: connect the power connector, then press it onto the steering wheel until the locking clips snap into place inside the steering wheel.

Watch the video!


by ScegliAuto

More videos