Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the rear shock absorbers on the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Shocks

Replacing the rear shock absorbers is very straightforward to do yourself: it essentially involves removing the bolts that secure the eyes of the shock absorber; to perform this operation, lift the vehicle and also apply a support jack under the rear suspension beam; once everything is secure, proceed to dismantle the bolts that attach the two eyes (upper and lower) of the shock absorber to the body and the beam; then remove the old shock absorber and insert the new one.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Shock Absorbers on the Fiat Punto?
How to Replace the Rear Shock Absorbers on the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the rear shock absorbers on the Fiat Punto, lift the car using a ramp and loosen the bolts that secure the wheel at the end of the rear ax…
How to Replace the Rear Shock Absorbers on a Fiat Punto
How to Replace the Rear Shock Absorbers on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this brief video tutorial, see how to replace the rear shock absorbers on a second-generation Fiat Punto, produced from 1999 to 2011. First, pull …
Replacing Car Shock Absorbers
Replacing Car Shock Absorbers
Fiat Punto (1999-2011 / MK 2, 188) When your car has covered many miles, it may be necessary to replace the shock absorbers, which serve to dampen the car's bumps and ensure safety whi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos