Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Honda Ridgeline - Key

Key Honda Ridgeline (2016-2024 / mk 2)

Honda Ridgeline (2016-2024 / MK 2)
How to replace the battery of the Honda Ridgeline 2 key.
In the following guide, you will find a description of all the steps necessary to complete the battery replacement for the key of your second-generation Honda …Read all…
Posted on 9 December 2025 by ScegliAuto
Honda Ridgeline (2016-2024 / MK 2)
How to replace the battery of the key fob for a Honda Ridgeline
In the selected video tutorial, you can observe the procedure for replacing the battery of the key fob for a Honda Ridgeline vehicle. It is a simple operation …Read all…
Posted on 5 September 2025 by ScegliAuto
Honda Ridgeline (2016-2024 / MK 2)
How to Replace the Remote Battery in the Honda Ridgeline 2
Replacing the battery in your Honda Ridgeline Mk2 remote (2016-2023) takes just a few seconds. Follow these steps to complete the task easily. First, take the …Read all…
Posted on 10 September 2026 by ScegliAuto
Honda Ridgeline (2016-2024 / MK 2)
How to Replace the Remote Battery in the Honda Ridgeline
Replacing the remote battery in the Honda Ridgeline is a very simple procedure that you can easily do on your own with our short video tutorial. Start by …Read all…
Posted on 23 August 2026 by ScegliAuto
Shocks (1) Battery (1) Spark plugs (1) Key (4) Checks and maintenance (2) Fog lights (1) Air filter (3) Cabin air filter (1) Headlight bulb (1) Interior dome light bulb (1) Engine oil (1) Rear bumper (1) Brake pads (2) Fuse box (2) Warning light – error code (1) Service warning light (5) Manufacturer emblem (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos