Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Honda
  4. :
  5. Wr V
  6. : How do you replace the gear knob on your Honda WR-V?

Honda Wr V - Video tutorial

Model: Honda Wr V MK 1, GL - Years 2017-2024
Part: Gear Shift Knob
Operation: How do you replace the gear knob on your Honda WR-V?

In order to replace the gear knob on the Honda WR-V, you need to detach the gear gaiter from the relative knob, loosening the fixing ring that joins the two components. When the gaiter has been detached, it will be possible to remove the knob from the end of the lever by unscrewing it and removing it completely from the gear lever. After the old knob has been removed, it will be possible to place the new one on the end of the lever and fix it by rotating the piece clockwise. Finally, it will be necessary to join the knob and the cap by tightening the special connecting ring.


Posted on 17 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos