Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install LED Lighting on the Gear Selector of the Honda Brio

Model: Honda Brio MK 2 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025

See other generations:
This video is currently unavailable

If you intend to customize your vehicle by installing backlighting on the automatic gear selector, follow the mounting instructions below and refer to the video. First, remove the clips from the plastic panels on the sides of the gear selector, then remove the screw securing the center console and use a plastic lever to lift the panel under the handbrake.

Next, remove the entire center console, being careful of the electrical connectors underneath that need to be disengaged. This will give you access to the gear selector trim, which you will lift to remove the plastic profile with the gear indicator.

Then, take an LED strip, cut it to size, and position it at the back of the gear selector. Finally, reassemble all components in reverse order.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

Where is the fuse box located on the 2021 Honda Brio?
Where is the fuse box located on the 2021 Honda Brio?
Honda Brio (2018-2025 / MK 2) The 2021 Honda Brio has two fuse boxes. The first box is located near the vehicle's battery, under the hood. The second box is located under the lowe…
How to Replace the Air Filter in a Honda Brio
How to Replace the Air Filter in a Honda Brio
Honda Brio (2018-2025 / MK 2) To replace the air filter in a Honda Brio, open the hood to access the components inside the engine bay. Next to the engine block, on the right side,…
Where Are the Fuses on the Honda Brio?
Where Are the Fuses on the Honda Brio?
Honda Brio (2018-2025 / MK 2) The fuses on the Honda Brio are divided into two different compartments. The first group of fuses is contained in a fuse box located inside the cabin…

How to unlock the radio of the Iveco Daily

When an Iveco Daily displays the radio error message or prompts to enter the radio code, it means you need to enter the unlock code to resume using the radio. This situation occurs after replacing or disconnecting the vehicle's battery. Enter the unlock code, which can be found in the vehicle's user manual or calculated through the "radio code" website. Input the code using the numeric buttons and then confirm by pressing the OK button. Once this is done, turn off and then turn on the ignition.

Watch the video!


by ScegliAuto

More videos